Cleaning additive to be added directly in the lubrication circuit. Thanks to this additive, compression is increased, engine runs cleaner, creates less pollutants emissions, is more protected and offers higher performances. It lowers also consumption and works as a deposit and residue remover from piston rings, gaps, hydraulic valve lifters and valve train. Engine Clean efficiently dissolves contamination and deposits in the oil system. These are then mixed with the oil to be easily removed during the oil change. Motul Engine Clean contains highly effective anti-friction properties that reliably protect the engine during the cleaning process.
Our additive range offers products for passenger cars as well as for two-wheelers and trucks, busses or other machinery. They preserve and protect against the most common causes for maintenance and repair.
Immediately after application, our additives will begin to restore performance and contribute to longevity. Repeated application in recommended Intervals amplifies the effects.
Before every oil change, add 1 can of Engine Clean to the used, warm engine oil. Let the engine run at idle for 15 minutes. Carry out oil and filter changes. The content of a can is sufficient for an oil volume of up to 5 liters. For engines with a higher oil filling quantity, 60 ml of MOTUL ENGINE CLEAN should be dosed per liter of engine oil. Another application is required for particularly stubborn dirt. With the combined use of MOTUL ENGINE CLEAN and MOTUL FUEL SYSTEM CLEAN or MOTUL DIESEL SYSTEM CLEAN, a significant improvement in exhaust emission values is achieved and an application before the special exhaust gas inspection is recommended. Disposal note: The product can be disposed of properly with the used oil.